Kmc-controls CTE–1103 Instrukcja Użytkownika Pobierz pdf

Installation Guide

Dual Temperature Room Thermostat

CTE –1003, 1004, 1103

Mounting

Standard:

• The base unit’s mounting slots are designed to align with the

holes in a standard 2" x 4" (51x102) handy conduit box.

• Use a 2" (51) deep box if using conduit.

• Normal screw and anchor systems may be used on solid

walls.

Hollow wall:

1. Cut a 3-3/4" x 1-3/4" rectangular opening in the wall.

(Check if unit is horizontal or vertical before cutting)

2. Make all necessary connections

3. Insert Toggle Bolt Assembly (HMO-5001, ordered separately)

through the wall and tighten.

Care should be taken not to bend or flex the base of the

thermostat.

Required Tools

• digital voltmeter

• small phillips screwdriver

• small flatblade screwdriver

• keyhole saw

Wiring

Typically, T1 and T3 are used for cooling and T2 and

T4 are used for heating. Refer to the wiring

diagram.

CTE–1004 has a jumper installed from terminal

“A” to terminal “4”. This causes the thermostat to

switch to an auxiliary flow lever when a call for

heating begins. This flow level may be adjusted

under the cover . If auxiliary flow is not needed,

remove the jumper.

1 2

Podsumowanie treści

Strona 1 - Installation Guide

Installation GuideDual Temperature Room ThermostatCTE –1003, 1004, 1103MountingStandard:• The base unit’s mounting slots are designed to align with th

Strona 2 - Maintenance

KMC ControlsP.O. Box 49719476 Industrial DriveNew Paris, IN 46553U.S.A.TEL: 574.831.5250FAX: 574.831.5252E-mail: [email protected]

Powiązane modele: CTE–1004 | CTE–1003 |

Komentarze do niniejszej Instrukcji

Brak uwag

Kmc-controls CTE–1103 Instrukcja Użytkownika

Przeglądaj online lub pobierz Instrukcja Użytkownika dla Czujniki Kmc-controls CTE–1103. KMC Controls CTE–1103 User Manual Instrukcja obsługi

Podsumowanie treści

Powiązane modele: CTE–1004 | CTE–1003 |

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Czujniki Kmc-controls CTE–1103